Buy the Best Mobile Repairing Tools
Good quality tools are always good for the workstation. You can find many cheapest types of equipment on the market but they will exhaust your time and efforts. In this article, I will explain about mobile repairing tools. The best quality tools may be costly but you will get a great result.
Mobile repairing tools play a vital role to make your work more perfect and effective.
There are more than hundreds of mobile repairing tools available in the market but we need to examine what is good and effective. Let’s know more about Mobile repairing tools:
Used to solder small components like a capacitor, resistor, diode, transistor, regulator, speaker, microphone, display, etc. A 50-watt soldering iron is good enough for most mobile phone repairing job. When buying a soldering iron, select the one that is easy to hold and does not burn your hand. The soldering iron must have the option to choose and select different types and shapes of soldering tips or bits.
Soldering Station :
A soldering station has 2 units a station and an iron. It has the option to control temperature depending on the heat requirement of the soldering job being done. The soldering station is better and more convenient than a traditional soldering iron. It makes soldering work much easier and faster. When buying a soldering station for mobile phone repairing one must always select an ESD-Safe (Antistatic) model.
Touch Separator :
An LCD Touch separator is very effective when it comes to repairing the touch screen effectively. The accurate microprocessor controller along with high-quality heater makes it best for LCD repairing.
PCB Holder / PCB Stand :
A PCB holder or PCB stand is used to hold the PCB of a mobile phone while soldering or repairing. It holds the PCB very strongly and doesn’t allow it to move thus helping in repairing. Again, it is important and wise to select a good quality PCB holder rather than a cheaper and inexpensive one.
Solder Wire :
Solder wire is used to solder electronic components Composition of most solder wire is tin and lead in the ratio 60:40 or 63:37. Lead-free solder wire is available in many compositions but the most common composition is tin/silver/copper in the Ratio 96.5:3.0:0.5. Solder wire is available in different diameters such as 2.0mm, 1.5mm, 1.0mm, 0.5mm, 0.2mm, etc. For mobile phone repairing 0.5mm solder wire is best suitable. Kester is a world-renowned manufacturer and supplier of solder wire and other soldering material.
Thinner or PCB Cleaner :
Thinner or PCB cleaner is used to clean the PCB of a mobile phone. The most common PCB cleaner used in mobile phone repairing is IPA or Isopropyl Alcohol. It is important to buy only good quality PCB cleaner as poor quality PCB cleaners can damage the board.
Jumper Wire :
This is a thin laminated or coated copper wire used to jumper from one point to another on the track of a mobile phone while repairing. Most people doing the work of mobile repairing do jumper to solve many problems.
This is used to remove lamination from jumper wire. It can also be used for several other purposes.
Used to find faults, check track and components. Always buy a good quality reliable ESD-Safe Digital Multimeter for mobile repairing works.
It is used for cutting.
It is used for cutting.
It is used to remove and tighten screws while assembling and dissembling a mobile phone. Precision screwdrivers of sizes T4, T5, T6, and forehead are good for most mobile repairing job.
These are needed to hold electronic components, ICs, jumper wire etc while soldering and Disordering.
These are used for cleaning the PCB of a mobile phone while repairing. It is important to buy only ESD-Safe cleaning brushes.
Hot Air Blower :
It is also called SMD (Surface Mount Device) rework system and SMD repair system. It has control to regulate or manage temperature and flow or hot air. Always buy a good quality ESD-Safe hot air blower.
It is used to boost the power of a battery of a mobile phone.
Ultrasonic Cleaner :
Used to clean the PCB of a mobile phone and electronic components.
BGA Kit :
Used to Reball and repair ball-type ICs. BGA stands for Ball Grid Array.
Magnifying Lamp :
It is used to see the magnified view of the PCB of a mobile phone. Most magnifying lamps also have light. Magnifying Lamps are available in different magnification such as 3x, 4x, 5x, 10x, 50x, etc.
Mobile Opener :
These are used to open the housing or body of a mobile phone.
DC Power Supply :
Regulated DC (Direct Current) power supply is used to supply DC current to a mobile phone. Most repair people used DC power supply to switch ON a mobile phone without battery.
Liquid Flux :
It is used to clean PCB track and legs or pins of electronic components while soldering. Liquid flux improves the quality of soldering. Kester flux is world-renowned for good quality.
Paste Flux :
This is also used while soldering.
Solder Paste :
This is solder in molted semi-solid form. It looks like a paste. Solder paste is mainly used for Rebelling against ICs.
This is used to clean the tip of soldering iron while soldering.
- Desoldering Wire:
Desoldering wire or Desolder wire is used to remove excess solder from a track of PCB. Chemtronics is a world-renowned manufacturer and supplier of Desoldering wire.
It has several screwdrivers of different shapes and sizes to disassemble and assemble a mobile phone. Aven Tools is a world-renowned manufacturer, exporter, and supplier of all kinds of tools and toolkits.
- IRDA or Infrared Workstation:
This machine is similar to the hot air blower. The only difference is that it gives heat through infrared. It is very precise and gives heat only where it is needed thus preventing any damage to nearby electronic components on a PCB.
Used to check whether LCD screen on a mobile phone is faulty or not.
It is used to see a magnified view of PCB or electronic components. These are available in different zoom options. Many microscopes can also be connected to a computer or a monitor.
Test JIG Box:
This device is used to diagnose and find fault or problem on a mobile phone. It helps the mobile phone to work and function normally outside its case. This helps to test and check the voltage and other test points on the PCB. It simple words it helps the mobile phone to work without a battery.
It is work on the wrist of the person who is repairing a mobile phone. It helps to discharge or ground static charge thus preventing the PCB or electronic components from any damage.
Antistatic Hand Gloves:
It is important to wear ESD-Safe hand gloves while repairing a mobile phone to prevent PCB and electronic components from static charge.
It is laid or placed on the table or workbench where mobile repairing is done. The mat is grounded using a grounding cord or normal grounding wire. This also prevents damage from static electricity.
It is a dress work by people who repair mobile phones. This also helps to discharge static electricity.
This is an exhaust fan that helps to filter smoke that comes out while soldering and Desoldering.
This device is used to test and analyze the status or condition of the battery of a mobile cell phone.
- OCA Machine –
It is a machine but also a handy tool when it comes to fixing the broken mobile phones. OCA Lamination machine is widely popular and can increase the revenue from the mobile repairing and servicing business. There are a lot of variations available in the market.
Upgrade yourself in the Mobile industry, visit: Advance Mobile Repairing Training Program
So after reading the whole article, you must have a certain idea about mobile repairing tools. A good quality tool saves your efforts and gives more results where other hands, cheapest mobile repairing tools may harmful to products.